4 Common Problems With Dishwasher And How To Fix Them

There are a lot of things that can go wrong with a dishwasher. More often than not these things do go wrong. Some of the most common issues can be dealt with by simple methods and checks which you can perform yourself.

For a few other complicated issues, it is much better to seek professional help. If anything goes wrong while you are trying to repair it yourself then you will have no other option but to call professionals for dishwasher repair in Marietta GA. Now let’s get into the details of these common issues and learn how to resolve them effectively.

Issue # 1: Overflowing Dishwasher

There is a float device inside the dishwasher if for some reason it stops working or gets stuck in one position and stops floating in response to the rising water, the washer will then overflow. The issue can be resolved by simply pushing the float up and down a few times until it gets unstuck. After you perform it manually a few time the dishwasher should start working properly again without an overflow of water.

Issue # 2: Leaking Dishwasher Door

This is a common issue with dishwashers which are used extensively. The door of the dishwasher starts leaking randomly. This might be the case if you have overloaded the washer and the door is not properly shut. This issue can be resolved by rearranging the items inside the dishwasher. If the door is leaking due to a problem with the seal then you will have to replace the seal on the door.

Issue # 3: Problem With Draining Water

If the water is not being drained properly or if the draining is taking too long then the only probable issue is that there is something stuck in the draining system. This can also be due to any blockage in the kitchen sink where that water from the dishwasher eventually ends up in. Clear anything that might be blocking the draining system and you will be good to go.

Issue # 4: The Dishwasher Is Not Cleaning As Well As It Used To

Well, this might be due to the dishwasher getting old but normally it can be fixed and is not a big issue. Your dishwasher still has a few years in it. But if we were talking about something more technical as in a Fridge freezer repair in Marietta GA then you would probably have to call in professional to look at it. But we are talking about a dishwasher here so let me give you a solution.

This process can get a little tricky so just bear with me a bit. First, you have to remove the access panel and the water line that is attached to the inlet valve. You will then have to remove the brass fitting and the valve bracket along with it. After removing the electrical harness you will have to install a new inlet valve. Then you have to put everything back like it was. Walla! Your problem is solved.